Country/region and language selection

Solutions for machine and systems engineering

Working together to ensure success

Are you a machine and systems engineering company and want to use TRUMPF machines to produce components for your systems quickly and to a high quality. Or would you like to get started in the field of industrial lasers in order to make your systems even more attractive? When it comes to solutions for machine and systems engineering, TRUMPF is the perfect partner for you. This is because, as a mechanical engineering company since 1923 and laser pioneer since 1979, we know from our own experience which products and complete solutions will impress your customers in the long term. TRUMPF machines and tools process numerous thick sheet metal parts and tubes in designs that are used in machine and systems engineering. Do you want to integrate laser technology in your systems? We are by your side: From the initial idea, optimization of parameters, and commissioning at your customer's premises up to subsequent service and additional application consulting in the case of new requirements.

TRUMPF is your perfect partner

Are you planning to integrate laser technology into your machines? Would you like to manufacture parts for your systems even more productively with our machines and tools? Find out more information here about how we can best support you as a machine and systems engineering company in these two cases.

Add TRUMPF. Add value. Solutions for machine and systems engineering

Opportunities for integrating TRUMPF products in machine and systems engineering

1. Processing optics

At TRUMPF, you can choose from a wide range of processing optics for various power classes, beam sources, and wavelengths. Through on-the-fly processing with TruTops I-PFO, you will benefit from intelligent component processing and a reduction in throughput. Our optics also have interfaces for status analysis.

2. Beam sources

Whether for cutting, welding, or laser metal deposition – at TRUMPF you can obtain a large range of beam sources for every processing application. From low power for plastic and high power for metal, to green, ultraviolet, or infrared for a range of other raw materials. We can provide you with the right beam sources for each material. They are Industry 4.0 ready and can be adjusted individually by way of parameters.

3. Sensor systems

For optimum processes and precise documentation. TRUMPF provides technology packages for laser metal deposition (DepositionLine), laser hardening with temperature control, and plastic welding with temperature control. These packages are specially designed for machine and systems engineering. For quality assurance at the end customer's plant, we provide sensor system data for documenting processes and product quality.

4. Laser systems

Perfect interplay: With our laser systems for cutting in 2D and 3D, welding, marking, and tube cutting, as well as for additive manufacturing, we provide you with coordinated complete solutions to get started immediately. Our laser cells can also be easily integrated into entire production lines. Due to the lifting doors, side or front accessibility to the TruLaser Cell 3000 is excellent. This makes it easy to completely integrate the machine into fully automatic systems.

5. Power electronics

A stable supply with a process flow: TRUMPF Hüttinger's product range offers everything that you need as a machine and systems engineering company. For example, generators for inductive preheating in the case of demanding laser welding tasks. This means that process times are shortened and results are optimized.

6. Services

Regardless of whether digital or analog technology is involved – with our services for the industry, we clearly set ourselves apart from the competition. Our dashboards can be customized precisely according to the requirements of your customers. You can also impress them with TRUMPF Technical Service directly on site. This means that the quality and functioning of the laser systems are ensured directly by the manufacturer.

7. Application service

Our laser application center is available for preliminary tests and optimizations, even after system configuration at the end customer's premises. Our experts work out the perfect laser parameters in consultation with you and the customer. In addition, our experts constantly search for new and even more effective solutions – including those that arise from thinking outside the box.

Smart monitoring

More transparent, more flexible, and more cost effective: With the Smart Factory range of services in the field of monitoring & analysis, your customers gain a continuous flow into production and expand this with lots of clever services to obtain a completely networked Smart Factory. 

Learn more about TRUMPF solutions for machine and systems engineering in our brochure

Add TRUMPF. Add Value. Solutions for machine and systems engineering
Add TRUMPF. Add Value. Solutions for machine and systems engineering

Challenge of component and variant diversity

Different materials, complex geometries and a high variety of variants – you are faced with quite a few challenges as a manufacturer of server and electrical cabinets. We are happy to support you in overcoming these challenges. In the past TRUMPF also faced similar problems when manufacturing machine cabinets and components. Benefit from our expertise in sheet metal processing and our machines which are optimized for processing the most varied of materials. The smooth production process will be accompanied by suitable software and automation solutions that sustainably increase productivity, flexibility and quality in your production and boost your competitiveness. Would you like your operations to be fully networked? Then we will help you embark on your journey in the Smart Factory and ensure maximum transparency on the shop floor.

Produce components and assembles with TRUMPF

Take advantage of our consulting!

Are you facing challenges in machine and systems engineering? Then please just fill out the contact form. We will get in touch with you and gladly advise you.

Request consultation

Areas of application

Anwendungsgebiete Schaltschrank

1. Top

Whether it is bending, punching or embossing – TRUMPF offers flexible production solutions for the multitude of top variants in server and electrical cabinets.

2. Doors & Sides

Doors and sides are the largest components in server and electrical cabinets. This is why our production solutions can achieve the most in terms of flexibility, ease of assembly and economy by cutting down on machining processes.

3. Mounting plates

From very small to very large: mounting plates come in a great variety of component sizes as well. Our flexible production solutions offer you precisely the flexibility you need for your high-end production.

4. Base & Floor

Time is money. So is space. We will work with you on an optimized design, thereby achieving high compatibility of cabinet and base, which will give you a great degree of space utilization, reduced workload and time savings.

Rely on services which will help you progress in the long run as well

Whether you need to create the best possible conditions for successful production, or make optimal use of your TRUMPF products and adapt them to changes flexibly – we will find options to sustainably maximize your added value together. As a partner, we support you with tailored solutions and service packages, enabling you to produce cost-effectively and to a consistently high standard.

Take advantage of our consulting!

Are you facing challenges in machine and systems engineering? Then please just fill out the contact form. We will get in touch with you and gladly advise you.

Request consultation
TruBend Series 5000, productive all-around machine
TruBend – extensive bending options

Whether you are bending housings, doors, covers, brackets or profiles, the TruBend Series offers the right solution for all formed components in an electrical cabinet.

TruPunch 5000, productive high-end machine
TruPunch – countless processing options

Whether it is cutting, bending, tapping or countersinking – the TruPunch Series offers this variety in just one processing station, thereby making the production more lean, open and transparent.

Find out more about TRUMPF solutions for machine and systems engineering

Part optimization – cleverly designed to make your component more cost effective
Part optimization – cleverly designed to make your component more cost effective
Brochure - TruConnect
Brochure - TruConnect
Flyer, Smart Factory consultation
Flyer, Smart Factory consultation

You may also find these topics interesting

Synapse image depicting a Smart Factory
Smart Factory

With the modular networking solutions from TRUMPF, we help our customers to create a continuous flow in their production facility, thereby arranging their entire production process with increased transparency, flexibility, and cost-effectiveness within the framework of Industry 4.0.

Part optimization key visual
Part optimization

Design your component more profitably – and save money. Together we will work out how you can make the most of the potential of your parts.

Energy and air conditioning technology
Air conditioning and energy technology

TRUMPF offers flexible machines and tool concepts for producing customized solutions and small quantities in the air conditioning and energy technology sector.

Contact
Dominik Herrmann
Industry management
Email

Marcel Gebhardt
Industry management
Email
Contact
Dominik Herrmann
Industry management
Email

Marcel Gebhardt
Industry management
Email
Service & contact