Battery-powered machines

TruTool C 160 chip clipper, 12V LiHD rechargeable battery

REQUEST OFFER

TruTool C 160 chip clipper, 12V LiHD rechargeable battery

For processing spiral ducts

REQUEST OFFER

Handy battery-powered machine with chip clipper

The TruTool C 160 12V LiHD rechargeable battery with integrated chip clipper for two-handed operation is ideal for notching work and interior cutouts of up to 1.6 mm in mild steel and 1.2 mm in stainless steel. It enables you to clip chips at any point. The cuts are free of deformation and of high quality, and the 4.0 Ah / 12V LiHD rechargeable battery guarantees long runtimes.

Just right

Compact and practical 12V rechargeable battery. Compatible in its voltage class and with the 12V-36V recharger.

Brushless motor

Practically unlimited service life, virtually wear-free and hardly any maintenance. Battery performance per charge is also increased.

Chip cutter for two-handed operation

The chips are clipped with a three-quarter clockwise turn by means of a lever

For interior cutouts and notches

You can cut chips at any time and pull the machine out of the workpiece.

Slitting shears: Video on the area of application

TruTool C 160 with chip clipper, 12V LiHD rechargeable battery, dimensional drawing

Leading

The world's most powerful rechargeable battery technology with 30 years of battery expertise from Metabo. Full compatibility within the 12V class – also with CAS partner machines. Universal recharger, regardless of whether you use 12V, 18V or 36V CAS rechargeable batteries.

Battery technology

LiHD rechargeable battery technology means more power, service life and runtime. It charges reliably using process-controlled charging and discharging management. The cells are protected by minimal temperature build-up and permanent electronic single cell protection (ESCP), even when used over very long periods. High-quality materials and intelligent battery management combined with brushless motors and power head technology mean longer runtimes. The rechargeable battery pack's outer rubber coating also provides secure and non-slip stability as well as impact protection.

For any application

We offer 4 different cutters to suit particular applications: The CR cutter is ideal for processing stainless steel. The curve cutter cuts with excellent contouring. There are two different cutters for straight cuts: one cutter for processing thin sheets of up to 1 mm and one for use on sheet thicknesses of 1 mm – 1.6 mm. A quick-release locking bolt enables you to change the cutter quickly and easily without the need for tools.

Flat sheet

For cutting and trimming flat sheets. For radial and interior cutouts as well as notching.

Profiles

For cutting C-L-U profiles and longitudinal cuts in profile sheets.

Tubes

For cutting tubes.

Checker plate

For cutting checker plates. For radial and interior cutouts.

Corrugated sheet metal

For cutting corrugated sheet metal. For radial and interior cutouts.

The following consumables and the corresponding accessories are included in the scope of delivery.

Cutting strip set, 2 units with screws (integrated)

Set of 2 0927708

Chip clipper (integrated)

1 unit 1884910

Straight cutter (integrated)

1 - 1.6 mm

Allen key DIN 911 - 2.5

1 unit 0067822

LG 12V-36V recharger

1 unit, DE/CH version: 2569784 | 1 unit, GB version: 2569786 | 1 unit, USA version: 2569785

12V LiHD 4.0 Ah rechargeable battery (2 units)

1 unit 2598770

TRUMPF Box S2

1 unit 1763682

Belt clip

1 unit 2579850

Find the right consumables and accessories for your machine here.

Cutter CR

Ideal for stainless steel and spiral ducts

Set of 2 1264346

Set of 5 1264347

Straight cutter up to 0.039 in.

Ideal for sheet thicknesses up to 0.4 in.

Set of 5 1264357

Set of 2 1264356

Curve cutter

Good performance cutting curves. For sheet thicknesses up to 0.039 in.

Set of 2 1264358

Set of 5 1264359

Spare parts set

1x cutting strip set, 1x chip clipper

Set of 1 0927709

Straight cutter 0.039 - 0.063 in.

Ideal for sheet thicknesses of 0.39 - 0.63 in.

Set of 2 1264343

Set of 5 1264345

Cutter set

1 x straight cutter 0.039 in., 1 x curve cutter

Set of 1 0913521

Chip clipper

For interior cutouts and notches

1 unit 1884910

Set of 2 1264370

Belt clip

Suitable for the 12V LiHD battery machines

1 unit 2599016

Cutting strip set

2 units with screws

Set of 2 0927708

12V starter kit

1x LG 12V-36V recharger / 2x 12V LiHD 4.0 Ah rechargeable battery

1 Set (DE) 2598815

1 Set (GB) 2598819

1 Set (USA) 2598817

LG 12V-36V recharger

For 12V and 18V LiHD rechargeable battery

1 unit (DE/CH) 2569784

1 unit (GB) 2569786

1 unit (USA) 2569785

12V LiHD 4.0Ah rechargeable battery

1 unit 2598770

TRUMPF Box S2

1 unit 1763682

Parallel stop

For cutting parallel strips with width of 1.37 - 11.8 in.

1 unit 0143439

Power-Head Technology

The light metal gear head's ingenious design is specially adapted to the low voltage battery technology. Decoupling the motor pinion from the motor minimizes energy loss and ensures even higher performance per battery charge.

Brushless motor

The powerful BL motor generates higher torques than conventional motors, requires less power and generates hardly any heat. This positively affects battery performance and means you get the maximum from every battery charge. A further advantage is the practically limitless service life of a BL motor due to the absence of carbon brushes and therefore no mechanical wear. This means almost wear-free and maintenance-free motors.

Small and handy

The 12V rechargeable battery tool has a lightweight design enabling fatigue-free working. The soft grip ensures safe and low-vibration working. All TRUMPF rechargeable battery tools are also available as stand-alone versions, i.e. without rechargeable batteries and recharger. If you already have CAS batteries available, you then have the option to save on resources and cut costs.

Optimal working speed

You can use the speed controller to adjust the working speed to suit the individual cutting task. This provides a variable cutting speed of up to 29.5 feet per minute. The speed controller is highly efficient for work with scribed lines or with a template. It is also well-suited to frequent processing of radii and stainless steel. The electronic overload protection offers yet another notable benefit.

	TruTool C 160 chip clipper, 12V LiHD rechargeable battery
Maximum sheet thicknesses
Maximum sheet thickness, steel 400 N/mm²	1.6 mm
Maximum sheet thickness, steel 600 N/mm²	1.2 mm
Maximum sheet thickness, aluminium up to 250 N/mm²	2 mm
Spiral duct steel 400 N/mm²	4 x 0.75 mm
Radii
Smallest radius	L 48 mm / R 40 mm
General
Working speed (max.)	9 m/min
Starting hole diameter	15 mm
Voltage	12 V
Dimensions
Length	357 mm
Height	88 mm
Weight
Weight (incl. rechargeable battery)	1.6 kg

PDF <1MB

Technical data sheet

The technical data of all product versions as a download.

This product range and information may vary depending on the country. Subject to changes to technology, equipment, price, and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.

You may also find these topics interesting

Construction industry

Robust and durable – TRUMPF's power tools for metal processing and its generators for glass coating are tailored to the industry.

Cordless Alliance System

Cross-manufacturer rechargeable battery system for leading power tool manufacturers. One rechargeable battery for everything, 100% compatibility for machines, rechargeable battery packs and rechargers – regardless of manufacturer. The world's most powerful battery system with 30 years of battery expertise from Metabo. Maximum reliability, clear cost benefits and a sound investment.

Image of the technology inside the TRUMPF battery-powered machines

10.8 V Li-ion batteries

Save money by combining products! Our 10.8 V Li-ion batteries can be interchanged with all current TRUMPF battery powered tools and the charger. You can even purchase the cordless tools as standalone machines without the battery and charger.

Service & contact

Contact

Power Tools Sales

Phone +91 11 4057 6350

Fax +91 11 2922 1357

Services

Downloads

One battery, many solutions

pdf - 5 MB