Short and ultrashort pulse lasers

TruMicro Series 6000

Powerful, compact, flexible

REQUEST OFFER

Overview

Applications

Technical data

Software

Options

Focusing optics

Reliable ultrashort pulse lasers for the highest demands in series production

The TruMicro Series 6000 ultrashort pulse lasers are tried and tested, industrially proven solutions that are ideal for demanding series production.

Thanks to slab technology, the laser pulses generated can be flexibly linearly amplified to very high pulse energies. Thanks to the wide range of adjustable parameters, even complex processes can be optimally realized.

These robust and stable lasers are used extensively in the industry in 24/7 operation and impress with their high load capacity - ideal, for example, for cutting applications on OLED displays or separating flexible printed circuit boards in the consumer electronics sector.

Precise control of laser parameters

Optimal energy and timing on the workpiece - can be controlled by the scanner.

Strong performance

The ultrashort pulse lasers generate high average power due to high pulse energies.

Great range of material

Whether IR, green or UV – selecting the correct wavelength means the most varied of materials can be processed in the best possible way.

Excellent quality

With the TruMicro Series 6000, you will receive industrial, high-quality series products based on established components.

High process stability

The internal power control ensures stable output parameters and a homogeneous process result.

Highly dynamic cutting with TOP Cleave

Glass modification

Extreme thicknesses greater than 10 mm can be efficiently processed and then cut with TRUMPF TruMicro lasers and TOP Cleave optics. After cutting, it is not necessary to post-process the cutting edge, such as by grinding or polishing.

Cutting copper foil

The finest structures to the dimension order of micrometers can be cut precisely with a minimal heat-affected zone. This is true even for materials with high reflectivity such as copper alloys.

TruMicro application image, organic material

Cutting organic material

The combination of ultrashort durations with high intensity enables microprocessing with incomparable precision. Even highly sensitive organic material can be cut without damaged or burned edges.

Ablation of gold and ceramic

The TruMicro 6020 cuts and processes technical high-performance ceramics for power electronics and consumer electronics. Precise ablation creates conductive paths, replacing etching processes - an environmentally friendly advancement.

Cutting of printed circuit boards

With the green wavelength, you can process flexible printed circuit boards (FPC) for the electronics industry and medical technology. The laser guarantees quick and precise cutting, without a heat-affected zone. The best edge qualities are achieved, even with plastics.

Wood cutting

The TruMicro 6220 cuts wood with precision. Thanks to advanced ultrashort pulse technology, organic materials are processed without leaving any residue.

	TruMicro 6020	TruMicro 6220	TruMicro 6320
Laser parameters
Average output power	200 W	100 W	30 W (< 500 fs) or 50 W (< 850 fs)
Beam quality (M²)	< 1.3 , optional M² < 1.2	< 1.3 , optional < 1.2	< 1.3 , optional < 1.2
Wavelength	1030 nm	515 nm	343 nm
Pulse duration	< 850 fs or < 5 ps	< 850 fs	< 500 fs or < 850 fs
Maximum pulse energy	200 µJ for 1 MHz or 2 mJ with 100 kHz	100 µJ at 1000 kHz	37.5 µJ at 800 kHz (30 W) 50 µJ at 1 MHz (50 W)
Maximum repetition rate	50000 kHz QCW mode	2000 kHz	2000 kHz
Structural design
Dimensions of laser head (W x H x D)	600 mm x 366 mm x 735 mm	600 mm x 366 mm x 735 mm	600 mm x 366 mm x 735 mm
Dimensions of supply unit (W x H x D)	446 mm x 915 mm x 725 mm	446 mm x 915 mm x 725 mm	446 mm x 915 mm x 725 mm
Installation
Ambient temperature	15 °C - 35 °C	15 °C - 35 °C	15 °C - 35 °C

PDF <1MB

Technical data sheet

The technical data of all product versions as a download.

TruControl

TruControl is the quick and easy-to-use control for TRUMPF solid-state lasers. It regulates the laser power in real time in order to deliver reproducible results. TruControl manages, controls, and visualizes the interface configuration. You benefit from a uniform control architecture across all laser technologies. The lasers have interfaces to control intelligent TRUMPF optics, such as monitored CFO focusing optics or PFO scanner optics. You can easily program the processing optics via the laser control system. The remote support service provided by TRUMPF means that you receive off-site support within seconds. This will allow you to avoid service calls or be as prepared as possible and increase the availability of the laser device.

TO PRODUCT

Advanced Pulse on Demand

The precise time definition of the individual laser pulses is relevant for an optimum process result. The exact time and pulse energy per individual pulse can be set due to the linear slab amplification. Particularly in combination with a scanner, this function can provide equidistant pulses on the workpiece even in the case of acceleration or deceleration.

Condition Monitoring

Have your laser monitored by our TRUMPF experts and algorithms. We contact you proactively at the first signs of anything unusual. This avoids unplanned downtimes in your production.

Digital connection and integration for smart solutions

Seamless integration of multiple TRUMPF machines into your own software environment is very easy. We have the right solution for every combination, whether it be integration into Oseon or a connection to monitoring and analysis tools. A connection to third-party software systems is also possible with our interfaces based on the OPC UA standard.

TOP Cleave cutting optics

The TOP Cleave-2 PRO focusing optics are processing optics for high-dynamic cutting of transparent materials, such as glass or sapphire.

TOP Weld processing optics

The innovative processing optics for welding transparent materials without intermediate layers.

TOP Weld

Welding glass or glass to metal without intermediate layers.

To the product group

Scanner

This product range and information may vary depending on the country. Subject to changes to technology, equipment, price, and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.