TruLaser 1030 fiber / 1040 fiber / 1060 fiber

The operation of the machine is intuitive, even if you have not had much practice with laser cutting. Much less manual effort as the machine carries out a lot of the setup automatically.

The Touchpoint HMI of the machine is as easy to operate as a tablet. You will learn how to work with it very quickly.

Cutting parameters for all materials and sheet thicknesses are stored in the machine software. TRUMPF experts have developed and intensively tested the parameters – which means TRUMPF laser cutting expertise is included in your machine.

Regardless of the component geometry, nanojoints make process-reliable and resource-efficient machining of your components possible: higher productivity, better part quality and simpler part removal thanks to minimal fixing in the scrap skeleton. In many cases, no reworking is necessary. In comparison, microjoints fix the component in the scrap skeleton with a tab across the entire sheet thickness. In most cases, the visible damage to contours requires time-consuming reworking of the components. Part removal is more complex with thin sheet thicknesses, with mid-range sheet thicknesses it is almost impossible.

Collision protection for your cutting head guarantees the highest process reliability. You benefit from shorter non-productive times due to increased machine availability. In the event of collisions, damage to the cutting head is avoided.

Mild steel becomes extremely hot during laser cutting and may melt uncontrollably. With CoolLine, this does not happen. During processing, nozzles with precise bore holes spray water mist in a circle around the laser beam onto the workpiece. The vaporisation energy of the water means that the material around the laser beam is cooled. CoolLine therefore enables new geometries, closer nesting and increases process reliability for the processing of thick mild steel considerably.

A laser can become damaged by reflection when cutting non-ferrous metals. There is no risk of this with TRUMPF lasers: you will cut non-ferrous metals such as copper and brass, or even galvanised sheet metal and foil-coated stainless steel as reliably as you are accustomed with stainless steel, mild steel and aluminium.

Clean protective glass ensures high cut quality in the long term. In the standard version, a sensor permanently monitors the condition of the protective glass so that you know when it must be changed. Cleaning and replacement are only carried out when required, saving costs.

AdjustLine enables the easy adjustment of the cutting process to materials of different quality. The function increases process reliability, above all when cutting material of a poor quality. This results in fewer waste parts and lower material costs for you. The operator can switch AdjustLine on or off at any time – programming is not required.

The Sorting Guide is a camera-based assistance system that assists the worker in removing and sorting sheet metal parts. It marks parts with different colours according to the customer order or subsequent process. This enables the worker to quickly, easily and correctly arrange the cut parts on pallets.

With Drop&Cut, remainder sheet is utilised more easily, intuitively and efficiently. A camera ensures that the live image of the machine interior appears directly on your user interface. You can position any number of part geometries on the remainder sheet. This saves a lot of time during the post-production of individual parts. Time-consuming process steps such as aligning the sheet, sheet position measurement or zero point displacement are not needed.

Using the MobileControl app, you can operate and monitor your machines easily and with flexibility as the app transmits the interface of the standard control panel onto the touch screen of your tablet PC. The app enables you to call up machine information at different places in the working environment of the machine, such as the clearing area, or to change the program.

The Cutting Guide supports you in finding the causes of different cutting problems. It provides functions for checking the optimum machine settings.

Seamless integration of many TRUMPF machines into your own software environment is very easy. We have the right solution for every combination, whether it be integration into Oseon or a connection to monitoring and analysis tools. A connection to third-party software systems is also possible with our interfaces based on the OPC UA standard.

The EdgeLine Bevel function can now do even more: Cut chamfers and indentations, and round off edges directly on your laser cutting machine. You can thus reduce the amount of work required for additional process steps and prevent sharp-edged sheet metal. Simple and quick programming from EdgeLine Bevel supports your range of applications. This specifically means that you can process chamfers with different angles and indentations in several sizes. In addition, rounded edges improve the visual appearance of your components and reduce the risk of cuts.

The TruLaser Series 1000 is available in different combinations: you have different machine formats and various laser powers at your disposal, depending on what you would like to process. Even high levels of laser power can be fully utilised with TRUMPF machines, as our lasers not only have high feed rates but also ensure that the power is fully applied to the sheet. This means that with our lasers, you process your workpiece with maximum productivity. Would you like to optimise your upstream and downstream processes as well? There are also various options available for automation – of course, we would be happy to advise you on this as well.

You will now receive two different modes of the function to prevent collisions. Whether sheet mode or single part mode, you can largely avoid using microjoints. saving costly reworking. The parts can also be unloaded using an automated mechanism as they do not tip over.

A camera system determines the position of inserted sheets precisely, and enables the reworking of parts which have already been cut with absolute precision. DetectLine also automatically measures a cut focusing comb and sets the focal position.

BrightLine fiber turns the solid-state laser into a universal tool: the function provides you with high-quality cutting results over the entire sheet thickness range. Furthermore, all of the advantages of the solid-state laser are retained, in particular the high speeds, during thin sheet processing.

PierceLine monitors and controls the piercing process. This saves material and preserves the machine, increasing part quality and shortening the piercing time by up to 80%.

The integrated gas mixer combines the cutting gases nitrogen and oxygen with each other automatically, without any operator involvement. The use of a gas mixture combined with a high laser power improves the part quality in mild steel and aluminium. The burr of the laser-cut component can be reduced in relation to the material type, material alloy and material quality.

Quick and economic – without compromising on quality: with Highspeed, you can set new records with the solid-state laser when it comes to cutting with nitrogen. As a result, you can almost double your sheet throughput for medium and thick mild steel and stainless steel sheets. It is also possible to double the feed rate. A special nozzle design also reduces your cutting gas consumption by up to 40% and even prevents burr formation on contours with sharp edges.

Extremely quick, extremely economical: with this Highspeed process, you can reduce your cutting gas consumption for cutting with nitrogen by on average 60%. This is enabled by a patented nozzle design. At the same time, you can almost double your sheet throughput for medium and thick mild steel and stainless steel sheets and increase the feed rate by up to 70%. Quality does not suffer as a result. Highspeed Eco even prevents burr formation on contours with sharp edges. The process also harnesses new sheet thicknesses for processing with nitrogen.

With the automatic nozzle changer, you can leave your machine to operate in continuous operation. If the machine needs a different cutting nozzle for a new job, the automatic nozzle changer can be relied upon to take care of this, without the need for user intervention.

Thanks to the one-cutting-head strategy, the TruLaser 1030 fiber can cope with any material and sheet thickness at the press of a button. The focus position and focal diameter are automatically adjusted to the type of material and sheet thickness.

With TRUMPF you will get reliable machines, a smooth production and high-quality results. The accurate combination of laser power, machine design and intelligent functions produces the best parts in the shortest processing time, with fusion and flame cuts, even with complicated applications, fine contours or thick sheet metals. We build all our lasers and machines ourselves with decades of experience under our belts. The priority is your success with TRUMPF products. We would be happy to advise you on all the details.